English | Français

INSTITUT D’AÉRONAUTIQUE ET DES ETUDES SPATIALES

Publications

Publications  

Publications 2019
  • CHOUTRI, Kheireddine, LAGHA, Mohand, et DALA, Laurent. Distributed Obstacles Avoidance For UAVs Formation Using Consensus-based Switching Topology.International Journal of Computing and Digital Systems, 2019, vol. 8, no 2, p. 167-178. http://dx.doi.org/10.12785/ijcds/080208
  • HAMAIDIA, Walid, ZEBBICHE, Toufik, SELLAM, Mohamed, et al. Performance improvement of supersonic nozzles design using a high-temperature model. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2019, p. 0954410019831862. https://doi.org/10.1177/0954410019831862

  •  ABDERRAHMANE, Belkallouche, REZOUG, Tahar, et DALA, Laurent. Passive control of cavity acoustics via the use of surface waviness at subsonic flow.Aircraft Engineering and Aerospace Technology, 2019, vol. 91, no 2, p. 296-308. https://doi.org/10.1108/AEAT-01-2018-0061

  • Dahia, A., Merrouche, D., Merouani, D.R. et al. Arab J Sci Eng (2019) 44: 5233. https://doi.org/10.1007/s13369-018-3518-2

  • ZEBBICHE, Toufik. Supersonic Dual Bell Axisymmetric Minimum Length Nozzle Conception for High Propulsion Thrust. International Journal of Aeronautical and Space Sciences, 2019, p. 1-15.https://doi.org/10.1007/s42405-019-00164-7

  • ZEBBICHE, T. Stagnation pressure effect on the supersonic minimum length nozzle design.The Aeronautical Journal, 2019, vol. 123, no 1265, p. 1013-1031 https://doi.org/10.1017/aer.2019.42

  • BOUKERT, B., BENKHEDDA, A., ADDA, E. B., et al.Hygrothermal Stresses Analysis of Thick Composite Plates Using High Order Theory Under a Fick Concentration Distribution. Procedia Structural Integrity, 2019, vol. 17, p. 37-43. https://doi.org/10.1016/j.prostr.2019.08.006

  • Choutri, Kheireddine, Lagha, Mohand, Dala, Laurent and Lipatov, Michael (2019) Multi- Layered Optimal Navigation System For Quadrotors UAV.Aircraft Engineering and Aerospace Technology. ISSN 1748-8842 (In Press) http://nrl.northumbria.ac.uk/40507/

Publications 2018
  • SIHAM, Dehouche et MHAMED, Hamadouche. Enhanced collective detection for GNSS weak signals  acquisition   in  Rayleigh          channel.International    Journal of        Satellite Communications and Networking, 2018, vol. 36, no 4, p. 332-351. https://doi.org/10.1002/sat.1236

  •  KHALI, El-Hadi et YAO, Yufeng. Large-scale flow structures in turbulence mixing of sonic jet injection into supersonic crossflow. International Journal of Theoretical and Applied Multiscale Mechanics, 2018, vol. 3, no 2, p. 145-160. https://doi.org/10.1504/IJTAMM.2018.096429

  • ZEBBICHE, Toufik. Rapid design method and new contours for a class of three dimensional supersonic nozzle of arbitrary exit cross section.Mechanics&Industry, 2018, vol. 19, no 4, p. 403. https://doi.org/10.1051/meca/2018003

  • BENNAMIA, Ismail, BADEREDDINE, A., et ZEBBICHE, T. Measurement of vibrations of composite wings using high-order finite element beam. Journal of Measurements in Engineering, 2018, vol. 6, no 3, p. 143-154. https://doi.org/10.21595/jme.2018.20046

  • DAHIA, Ahmed, MERROUCHE, Djemai, et REZOUG, Tahar. Radioactive Contamination Control by Atmospheric Dispersion Assessment of Airborne Indicator Contaminants: Numerical Model Validation. Environmental Modeling & Assessment, 2018, vol. 23, no 4, p. 401-414. https://doi.org/10.1007/s10666-018-9598-2

  • BOUKERT, B., BENKHEDDA, A., ADDA, E. B., et al. Temperature and Humidity Influence Analysis on the Behavior of Thick Composite Plates Using High Order Theory. Procedia Structural Integrity, 2018, vol. 13, p. 174-180. https://doi.org/10.1016/j.prostr.2018.12.029

Publications 2017
  • KHODJET-KESBA, Mohamed, BENKHEDDA, Amina, REZOUG, Tahar, et al. The influence of hygrothermal effects on the cross-ply composite laminate with transverse cracking in transient mode. Mechanics&Industry, 2017, vol. 18, no 1, p. 102. https://doi.org/10.1051/meca/2016004

  • MOHAMED, Khodjet-Kesba, AMINA, Benkhedda, BEDIA, Adda, et al. Moisture absorption effect on the stress distribution of the cross-ply laminates with transverse matrix cracks.Procedia Structural Integrity, 2017, vol. 5, p. 271-278. https://doi.org/10.1016/j.prostr.2017.07.131

  • BENACHENHOU, Kamel, HAMADOUCHE, Mhamed, et TALEBAHMED, Abdelmalik. New formulation of GNSS acquisition with CFAR detection.International Journal of Satellite Communications and Networking, 2017, vol. 35, no 3, p. 215-230. https://doi.org/10.1002/sat.1177

  • BOUN-JAD, Mohamed, ZEBBICHE, Toufik, et ALLALI, Abderrazak. High temperature gas effect on the supersonic axisymmetric Minimum Length Nozzle design.International Journal of Engineering and Technical Research, vol. 7, no 7.

  • DJILALI, Zidaneet BERGHEUL, S. Study of the Ball Milling Device for Synthesizing Nanocrystalline Powder. In :Journal of Nano Research. Trans Tech Publications, 2017. p. 60-70. https://doi.org/10.4028/www.scientific.net/JNanoR.47.60

  • HAMLATI, Z., LASLOUNI, W., AZZAZ, Mohammed, et al.Structure and magnetic properties of ternary nanosizedFeAlSn and CuFeCo powders synthesized by mechanical milling.In :Journal of Nano Research. Trans Tech Publications, 2017. p. 79-88. https://doi.org/10.4028/www.scientific.net/JNanoR.47.79

Publications 2016
  • SALHI, Merouane, ZEBBICHE, Toufik, et MEHALEM, Abderrahmane. Stagnation pressure effect on the supersonic flow parameters with application for air in nozzles.The Aeronautical Journal, 2016, vol. 120, no 1224, p. 313-354. https://doi.org/10.1017/aer.2015.13
  • BENNOUD, Salim, ZERGOUG, Mourad, et ALLALI, Abderrazak. Numerical simulation for cracks detection using the finite elements method.The International Journal of Multiphysics, 2016, vol. 8, no 1.
  • DILMI, Smainet BOUZOUIA, Brahim. Improving performance for nonlinear aeroelastic systems via sliding mode controller.Arabian Journal for Science and Engineering, 2016, vol. 41, no 9, p. 3739-3748. https://doi.org/10.1007/s13369-016-2113-7
  • KIRAD,           Abdelkader,     ZEBBICHE,    Toufik, et         BOUN-JAD,    Mohamed.       Numerical computation of shear stress in a complex cross section subjected to a shear force and application to airfoils. Mechanics & Industry, 2016, vol. 17, no 6, p. 608. https://doi.org/10.1051/meca/2015116
  • BALAJI, G. Naveen, PRABHA, R., SHANTHINI, E., et al.Rapid low power Synchronous circuits using transmission gates. Advances in Natural and Applied Sciences (Annexure II), 2016, vol. 10, no 17, p. 287-291.

Publications 2015
  • ABDELKADER, Kirad, TOUFIK, Zebbiche, et MOHAMED, Boun-jad. Torsional stress in non-circular cross sections by the finite element method.Advances in Mechanical Engineering, 2015, vol. 7, no 5, p. 1687814015581979. https://doi.org/10.1177/1687814015581979
  • SARI, Elkahina et ZERGOUG, Mourad. FEM techniques comparison for SIF computing of cracked Plate. Arabian Journal for Science and Engineering, 2015, vol. 40, no 4, p. 1165- 1171.https://doi.org/10.1007/s13369-015-1567-3
  • MAHI, Amale, ADDA BEDIA, El Abbas, TOUNSI, Abdelouahed, et al.A new simple shear deformation theory for free vibration analysis of isotropic and FG plates under different boundary conditions.Multidiscipline Modeling in Materials and Structures, 2015, vol. 11, no 3, p. 437-470.https://doi.org/10.1108/MMMS-03-2015-0010

Publications 2014
  • ABADA, Omar, ZEBBICHE, Toufik, et EL-HIRTSI, Ahmed Abdallah. Three-dimensional supersonic minimum length nozzle design at high temperature for arbitrary exit cross section.Arabian Journal for Science and Engineering, 2014, vol. 39, no 11, p. 8233-8245. https://doi.org/10.1007/s13369-014-1377-z
  • ALLOUCHE, R., HAOUI, R., et RENANE, R. Numerical simulation of reactive flow in non- equilibrium behind a strong shock wave during re-entry into earth’s atmosphere. Mechanics & Industry, 2014, vol. 15, no 1, p. 81-87.https://doi.org/10.1051/meca/2014002
  • ZEBBICHE, Toufik, BOUN-JAD, Mohamed, et ALLALI, Abderrazak. Geometric characteristics of thin wall sections with application to airfoils.Arabian Journal for Science and Engineering, 2014, vol. 39, no 8, p. 5917-5927. https://doi.org/10.1007/s13369-014-1152-1
  • TOUFIK, Zebbiche, MOHAMED, Boun-jad, et ABDERRAZAK, Allali. Structural characteristics of simply connected planar sections with application to airfoils.Journal of Materials and Engineering Structures «JMES», 2014, vol. 1, no 2, p. 89-98.
  • TOUFIK, Zebbiche, MOHAMED, Boun-jad, et ABDERRAZAK, Allali. Stress in closed thin-walled tubes of single box subjected by shear forces and application to airfoils. Journal of Materials and Engineering Structures «JMES», 2014, vol. 1, no 2, p. 73-88.
Publications 2013
  • LAGHA, M., TIKHEMIRINE, M., BERGHEUL, S., et al.De-noised estimation of the weather Doppler spectrum by the wavelet method.Digital Signal Processing, 2013, vol. 23, no 1, p. 322-328.https://doi.org/10.1016/j.dsp.2012.08.001
  • TIKHEMIRINE, M., LAGHA, M., et BERGHEUL, S. Noise cancellation in Doppler moment estimation of array weather radar signals using lifted biorthogonal wavelets. Digital Signal Processing, 2013, vol. 23, no 3, p. 744-750.https://doi.org/10.1016/j.dsp.2013.01.007
Publications 2012
  • HAMLATI, Z., GUITTOUM, A., BERGHEUL, S., et al.X-ray diffraction, microstructure, and Mössbauer studies of Fe 72 Al 28 alloy elaborated by mechanical milling.Journal of materials engineering and performance, 2012, vol. 21, no 9, p. 1943-1948. https://doi.org/10.1007/s11665-011-0095-x
  • ZEBBICHE, Toufik, SALHI, Merouane, et BOUN-DJAD, Mohamed. Numerical computation of supersonic flow around a pointed airfoils. Journal of Computational Methods in Sciences and Engineering, 2012, vol. 12, no 3, p. 213-233. http://dx.doi.org/10.3233/JCM-2012-0398
Publications 2011
  • ZIDANE, D., BERGHEUL, S., REZOUG, T., et al.Study of the Temperature Variations of Al and Ti in Mechanical Alloying.Journal of materials engineering and performance, 2011, vol. 20, no 7, p. 1109-1113.https://doi.org/10.1007/s11665-010-9721-2
  • BENNOUD, Salim et MOURAD, Zergoug. The non destructive testing methods applied to detect cracks in the hot section of a turbojet. In :Applied Mechanics and Materials. Trans Tech Publications, 2011. p. 79-83. https://doi.org/10.4028/www.scientific.net/AMM.61.79
  •  ALLOUCHE, R., HAOUI, R., PARISSE, J. D., et al.Study of Thermo-Chemical Non- Equilibrium Phenomena behind Strong Shock Waves at Atmospheric Reentry.In :Advanced Materials Research. Trans Tech Publications, 2011. p. 13-22. https://doi.org/10.4028/www.scientific.net/AMR.274.13
  • HAMLATI, Zineb, GUITTOUM, A., BERGHEUL, S., et al.Effect of the Milling Conditions on the Formation of Nanostructured Fe–Al Powders.In :Advanced Materials Research. Trans Tech   Publications,    2011.   p.490-497. https://doi.org/10.4028/www.scientific.net/AMR.214.490

  • RENANE, R., SERRO-GUILLAUME, Olivier, NOUR, A., et al.Simulation and analysis of the structure of laminar premixed flame.In :Advanced Materials Research. Trans Tech Publications, 2011. p. 23-32. https://doi.org/10.4028/www.scientific.net/AMR.274.23 
  • MAHI, A., ADDA-BEDIA, E. A., et BENKHEDDA, A. An analytical method for free vibration analysis of composite beams subjected to initial thermal stresses. In :Key Engineering Materials. Trans Tech Publications, 2011. p. 1-9. https://doi.org/10.4028/www.scientific.net/KEM.482.1
  • AMRI, R. et REZOUG, T. Numerical study of liquid propellants combustion for space applications. ActaAstronautica, 2011, vol. 69, no 7-8, p. 485-498. https://doi.org/10.1016/j.actaastro.2011.05.008
  • ZEBBICHE, Toufik et HAMDI, Nasreddine. Delaunay triangulation by a technical insertion point applied for complexes geometries. Journal of Computational Methods in Sciences and Engineering, 2011, vol. 11, no 3, p. 143-158. http://dx.doi.org/10.3233/JCM-2011-0372
  • REZOUG, Tahar, BENKHEDDA, Amina, KHODJET-KESBA, Mohamed, et al.Analyse des plaques composites fissurées et vieillies en conditions hygrothermiques. Mécanique & Industries, 2011, vol. 12, no 5, p. 395-398.https://doi.org/10.1051/meca/2011134
Publications 2010
  • LAGHA, Mohand, TIKHEMIRINE, Mohamed, BERGHEUL, Said, et al. Performances comparison of pulse pair and wavelets methods for the pulse Doppler weather radar spectrum. In :Wavelet Applications in Industrial Processing VII. International Society for Optics and Photonics, 2010.p. 753504.https://doi.org/10.1117/12.838719
  • HADDAD, Ahmed, ZERGOUG, Mourad, AZZAZ, Mohamed, et al.Monitoring of metal powder by eddy current. International Journal of Microstructure and Materials Properties, 2010, vol. 5, no 1, p. 3-14. http://dx.doi.org/10.1504/IJMMP.2010.032497
  • ZEBBICHE, Toufik. Numerical quadrature for the Prandtl Meyer function at high temperature with application for air. Journal of Computational Methods in Sciences and Engineering, 2010, vol. 10, no 1, 2, p. 13-22. http://dx.doi.org/10.3233/JCM-2010-0284
Publications 2009
  • LAGHA, Mohand et BENSEBTI, Messaoud. Doppler spectrum estimation by Ramanujan- Fourier transform (RFT). Digital Signal Processing, 2009, vol. 19, no 5, p. 843-851. https://doi.org/10.1016/j.dsp.2009.03.007
  • Zebbiche, T. (2009).Effect of the stagnation temperature on the normal shock wave.Journal of Computational Methods in Sciences and Engineering, 9(1-2), 79-92. http://dx.doi.org/10.3233/JCM-2009-0253
Publications 2008
  • BENKHEDDA, A., TOUNSI, A., et al.Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates. Composite Structures, 2008, vol. 82, no 4, p. 629-635. https://doi.org/10.1016/j.compstruct.2007.04.013
  • AISSANI, M., BASSIR, D. H., et BENKEDDA, Y. Thermal Simulation and Experimental Characterizations of Aeronautic Stainless Steel Welded by TIG process. International Review of Aerospace Engineering (I. RE.AS. E), 2008, vol. 1, no 5, p. 481-488.
  • ZEBBICHE, Toufik. Supersonic axisymmetric minimum length nozzle conception at high temperature with application for air.International Journal of Aeronautical and Space Sciences, 2008, vol. 9, no 1, p. 1-30. https://doi.org/10.5139/IJASS.2008.9.1.001
  • MEKARZIA, M. et GUERTI, M. Measurement and Identification of Acoustic Impulse Response. Building Acoustics, 2008, vol. 15, no 1, p. 73- 78.https://doi.org/10.1260%2F135101008784050197
  • ZEBBICHE, Toufik. Numerical Quadrature for the Prandtl Meyer Function at High Temperature with Application for Air.International Journal of Aeronautical and Space Sciences, 2008, vol. 9, no 2, p. 9-17.https://doi.org/10.5139/IJASS.2008.9.2.009
  •  OTMANE, Fadhela, BERGHEUL, S., HAMLATI, Z., et al.How Fe60Co40 and Fe72Al28nano-alloys  produced  by  mechanical  alloying  behave  when  exposed  to  microwaves.  In:Materials Science Forum. Trans Tech Publications, 2008. p. 977-981. https://doi.org/10.4028/www.scientific.net/MSF.584-586.977
  • LAGHA, Mohand et BENSEBTI, Messaoud. Performances comparison of pulse-pair and 2- step prediction algorithms for the doppler spectrum estimation. Multidimensional Systems and Signal Processing, 2008, vol. 19, no 2, p. 257-265.https://doi.org/10.1007/s11045-007-0030-3